Product Information

Hailea HC chillers have strong metal chassis with a housing of contemporary design,ensuring the chiller does not look out of place in any surroundings. They work almost exactly like mini-refrigerators, and they’re incredibly easy to set up and run.

All models are equipped with exchangers in pure titanium, and you can use them in both freshwater and in seawater. The digital display allows the maintenance of constant temperature.

Hailea HC chillers have strong metal chassis, HC series use the environmentally friendly refrigerant R134a. The design ensures low noise, whilst the digital temperature controller ensures that the selected temperature is maintained. The rate of flow is decided according to the max jet of the pump (immersible power filter) and the circulation equipment.

HAILEA HC chillers represent professional approach to aquarium technology!
• large water capacity
• high-quality titanium evaporator predetermines their use in freshwater and marine aquariums
• quiet operation compared to similar products
• digital control panel to set the desired temperature
• timeless design at affordable price
• environment friendly refrigerant R134a

Technical data of the Model: HC-250A

• Digital read-out (precise to 0,1°C increments)
• New more robust design for longer life
• Lowered noise output quieter than a standard refrigerator
• Suitable for continuous operation
• Auto restart after power outage
• Refrigerant R134a
• Titanium heat exchanger
• Power: 1/6HP
• Voltage: 220~240V
• Frequency: 50Hz
• Working Current: 1.3A
• Water Temperature Before Refrigeration: 28 Degrees Celcius
• Refrigeration Time: 20h
• Water Temperature After Refrigeration (Water Refrigerated 250L): 18 Degrees Celcius
• Water Temperature After Refrigeration (Water Refrigerated 300L): 22 Degrees Celcius
• Rate of Flow: 600 – 2200L/h
• Refrigerant: R134a
• Refrigerant Weight: 220g
• Weight: 18kg
• Size: 448×330×440mm

How to Use the Hailea Nutrient Chiller;

Setting up chiller kits is quick and easy. The diagram to the above gives you an overview of how they’re constructed.

You’ll need to connect the pump to the chiller’s inlet using a length of pipe and connect another length of pipe to the chiller’s outlet. Be sure to secure everything in place with the supplied hose clips.

The chiller should be cleaned after each crop to remove any mineral deposits and limescale. Just fill the chiller with clear pickling vinegar, leave for 24 hours, and then flush it with water. Ensure that you also set up an air circulator fan near the chiller to avoid any heat build-up.